Physical Installation Procedures:
Locally Setting IP Address to Static or DHCP if needed
- Plug a USB keyboard into the back of the EnVR
- Plug in a monitor into the EnVR.
- Press Ctrl + Alt + F3 to bring up a “Notice To Users” and a login prompt
Setting the EnVR to Static – Video Walkthrough
The password prompt on the screen will not show characters as you are typing and you cannot use the 10-Key pad on the keyboard as it will put in random information. This is normal!
System Log In
case-sensitive username: ipadmin
password: Security.(last 4 digits of the MAC)
EXAMPLE:(Security.fa98)
Type 1 and press <Enter> to choose “Configure a static IP(primary NIC)”.
<OR>
Type 2 and press <Enter> to choose “Configure to DHCP”
Enter the static IP information
Once IP information is entered, confirm correct, type “yes” and press <Enter> to save the settings.
Type “restart” to complete. This will restart only the internet adapter settings, not the whole DVR. If correctly entered the EnVR should now be active.
Was this post helpful?
Let us know if you liked the post. That’s the only way we can improve.